27.11.2017

DISTRIBUTION: Close the box in the middle, the most marginally in the middle of the desired size to move on top of each other.

LENGTH COVER: The lid that is the extension of the length measure in the box.

COATING: The surface of the corrugated cardboard; water, moisture, oil permeability of various materials to increase resistance to coating process. In the past, when using wax-based materials, water-based products that do not adversely affect the reuse of paper today are used. Application location is slot machine.

WAVE: The section perpendicular to the gutters is defined by the name of the wave due to its shape.

WAVE SIZE: It is the distance between the sticking points of one side or corrugated cardboard.

WAVE HEIGHT: The height between the top and bottom belts formed by the fluted paper.

DART FACE: The face of the kut, your height and your height.

ADJUSTING OUTPUT: 25-40mm, which combines narrow and wide face to make prismatic corrugated board. width and width of the box.

IMPREGNATION: To provide corrugated cardboard resistance, nuance resistance, high stacking strength with fluting paper, paraffin, etc. material impregnation process. It is applied in corrugated machine.

ENCLOSURE: The cover which is the extension of the largest dimension in the box.

ZIPCAP: Opposite blades used to facilitate opening in corrugated cardboard boxes. They are used in molded production.

LARGE FACE: The face of your face, height and height.

VENTILATING HOLE: Corrugated cardboard boxes are usually circular shaped cuts with special plates to allow the products in the boxes to vent.

EDGE ISKARTASI: It is the part cut from the edge of the plate which passes through the slotter for the purpose of ensuring the measurement accuracy.

EAR BUTTON: It is a piece cut from the top and bottom of the insertion ear.

LAMINATION: Offset printed cardboard sheets are laminated on flat or corrugated board on lamination machines.

OFFSET YARIK: Especially for automatic filling, for easy closing of the box doors, the rill is not centered, it is usually the slots that are slid to the inner doors

GREASE ROUTE: According to FEFCO, it is expressed by a triangle scanned inside. It is perpendicular to the working direction in the corrugated machine, and parallel to the working direction in the box production machines.

CORRUGATED RICE: Corrugated cardboard sheet, rills to be folded on the corrugated machine to fold the box covers. They always come straight to the grooves.

PERFORATION: Corrugated cardboard is to be cut only at certain points on the same line so that the sheet can be easily folded in both directions (inside-out) from the desired place. It is used in molded production.

PREPRINTING: Corrugated cardboard boxes are used to print the desired print on the used liner paper as a bobbin. The plate emerging from the crust is printed.

RIL: For folding of corrugated cardboard, traces are made in slotted machines, slotters or die blades. This word, called pilyaj in printing, is expressed as a trace or ril for corrugated cardboard makers.

FRAMEWORK: Corrugated board cut to size in corrugated machinery is called sector name, safiha, which is a very old term in the sector.

SKIP FEED: If the size of the corrugated board is longer than the circumference of the slotted cylinder, it must be missed by passing a plate through the machine for two turns of the cylinder.

SLOT ISCHARTASI: It is called a clippings from inside the slits.

SLOTTER RILIER: Ribbon cut from the rusted grooved rills is placed on the slotter to form the sides of the box. They come parallel to the gutters.

SLOT-HIT: Slits that are opened in the continuation of the slotter rills to form the box closures.

TEAR TAPE: In order to facilitate the opening process in corrugated cardboard boxes, 4-6 mm wide polypropylene tear tape is attached in the corrugated machine at the desired points / points of the plate at right angles to the grooves.

KUTAKU: To facilitate the transport of corrugated boxes, they are generally full or half-cut holes (30x90mm) with special patterns, which can be hand-held on the narrow sides of the box.

UPS-OPS-TWIN FLUTE-DUAL ARCH: Corrugated cardboard durability is intended to be used with the purpose of providing high stacking efficiency, instead of single fluting paper, by combining two low-weight paper with special builder.

EXTENDED JOINT INSERTION: Extension of the attachment ears in a sticking box to prevent overtopping of the ears (over 40mm).